All aluminum plate machining center scheme
Functional characteristics
The YM-1360 Double Saw Blade Double Pressure Roller Straight Line Tool Change Processing Center is an efficient machine specialized in cutting, punching, grooving, and shaping cabinet door panels for all aluminum furniture. It completely replaces traditional push table saws and electronic cutting saws, eliminating the dependence on manual labor in traditional cutting modes. Vertical holes are also completed simultaneously while cutting, and intelligent production is truly achieved by combining with specialized design and disassembly software. Save labor, materials, and time!
◆ High quality, automatic design, automatic typesetting, automatic program loading, no manual intervention, minimizing error rates, ensuring order quality
Fast speed and high efficiency, with an idle speed of up to 70 meters per minute. True annealing aging bed, rack and pinion transmission mode, stable transmission, ensuring long-term high-speed operation without deformation and shaking
◆ Adopting the Italian Ouli 9KW air-cooled high-power automatic tool changing spindle, it works stably for a long time, and the driving system adopts the Taiwan Maixin servo 850W motor.
◆The tabletop is an internationally leading high-strength, vacuum adsorption tabletop with high adsorption force, which can strongly adsorb materials of different areas.
◆ Intelligent protection of workbench: to prevent possible damage to the workbench caused by misoperation or software errors. Intelligent processing boundary protection to prevent mechanical collisions caused by design layout exceeding the processing width
◆臺灣精科控制系統，自動完成多重層面 3D 加工。能夠進行快速、平滑的三維立體加工，雕刻或切割?？蓪?shí)現脫機操作。
Equipment technical parameters
| ? | name | Model (YM-1360 Double Saw Blade Processing Center) |
1 | Effective stroke | Effective travel of X-axis 1300mm, Y-1 axis 3000mm, Y2: 3000mm, Z-axis 200mm |
? ? ? ? 2 | Bed structure | Six legs, a square tube with a thickness of 7.75, a stretched frame square tube with a thickness of 200 * 250, a stretched support of 100 square tubes, and a horizontal and vertical support full of the tabletop with a spacing of 40 centimeters. The steel strip on the guide rail surface and rack processing surface is 20 millimeters thick, and the overall weight increases by more than 500 kilograms. The stability and speed are matched |
? 3 | Processing method of bed side panel crossbeam | Effectively heating up by 580 degrees and naturally cooling down, then using a five sided machining center for precision milling of the machining surface, and then using a side milling head for drilling and tapping to synthesize once, with a machining accuracy of 5 threads |
4 | Rail rack | After the installation of the guide rail rack is completed, use a slider to push the dial indicator and adjust it to an accuracy of less than 5 threads |
5 | Transmission assembly | Taiwan original TBI screw, with a diameter of 25 leading to 10mm, Taiwan 30 square rail |
6 | Complete rack | Crescent high precision helical tooth |
? 7 | Z??Shaft assembly | The Z-axis adopts a holding brake motor, which will not slide or fall due to power failure. It adopts Japanese NCK integrated bearing module nuts, which can ensure smooth up and down concentricity. The lead screw is 2510, with fast speed and high accuracy |
8 | Complete machine motor | Maixin 850W servo motor and servo drive |
9 | Complete machine reducer | The XY reducer is made of Zhuo Blue and has a flange diameter of 130. There are three units in total, one for X and two for Y |
? 10 | Spindle power Tool magazine form | The Italian Oli 9KW automatic tool change spindle has a tool magazine arranged horizontally and vertically under the crossbeam, with a capacity of 12 tool magazines for the tool change spindle to freely adjust and process. |
11 | Frequency converter | Shenzhen Yidian Tong 11KW frequency converter. |
? 12 | Countertop structure | 7.5KW water circulation vacuum pump, after improving the pipeline, there is no need to increase the vacuum pump. The pump has a large power loss, ensuring that the board does not run out |
? 13 | Adsorption pump power | 7.5KW water circulation vacuum pump, after improving the pipeline, there is no need to increase the vacuum pump. The pump has a large power loss, ensuring that the board does not run out |
14 | Dust suction method | Each machine head is individually sealed by a cylinder to increase the dust suction flow at each dust suction port |
15 | Vacuum cleaner (optional) | 3.0KW dual bucket vacuum cleaner with a sealed suction port with high flow rate, eliminating the need for a high-power vacuum cleaner |
16 | operating system | Taiwan Jingke Control System |
17 | Knife setting method | High precision magnetic tool setting instrument, with an accuracy of less than 2 threads, and an automatic tool setting system that is convenient to use |
18 | Electrical components of distribution box | Schneider ABB AC contactor 32M7C, and 18M7C model, 60A circuit breaker |
? ? 19 | Complete machine cable | Customized high flexible double sheathed shielded mesh square cable with isolated wiring method, the cable will not bend, wrap, or twist inside the drag chain |
? ? 20 | positioning system | Five positioning cylinders, two at the front end and three at the side end to ensure a 90 degree right angle, with higher precision in flipping plate processing. The five axis machining center is milled with one tool, and the installation dial gauge has precision. The horizontal and vertical positioning cylinders are within 5 threads |
? 21 | Double saw blade | Main spindle power 5.5KW, saw blade diameter 200-400mm |
22 | Double pressure roller | Aluminum welded whole board, dedicated double pressure roller for honeycomb board |
23 | chassis | Independent chassis, roller type, can freely move the chassis position |
24 | Overall speed value | The actual cutting speed is 15-30 meters, and the air travel speed is 70 meters per minute |
25 | support software | Haixun, Yunxi, 1010, Yimu, Tongde and other cutting software and cabinet door software |
26 | Oil way | Automatic oil injection pump, each point can independently adjust the amount of oil injected, timing, and other functions |
27 | Table control structure | Automatic switching control table (dual station only) |
? ? 28 | safety system | 超程雙限位，急停按鈕保護，氣壓不足保護，配電箱開門斷電，電?壓缺項等安全保護 |
29 | Machine tool standards | International export CE certification, export standards |
?
Technical Parameter
Serial number | Performance refers to 標 | ? ? ? ? Parameters | |
? 1 | ? stroke | X??stroke | 1300mm |
Y??stroke | Station 1: 3000mm 工??位??2??：??3000mm | ||
Z??stroke | 200mm | ||
2 | Platform size | ? | 1420*7200mm |
? 2 | Precision | Precision | ±0.05mm |
Repeatability | ±0.05mm | ||
? ? 3 | ? structure | Countertop structure | Vacuum adsorption |
X?、Y?、Z??structure | X?、Y ?rack,Z??Lead screw | ||
? ? 4 | ? speed | Maximum empty travel speed | 80000mm/min |
Working speed | 30000mm/min | ||
? 5 | Spindle | Spindle power Double saw blade | Olly?9KW Main spindle saw blade power 5.5KW |
Spindle speed | 0-24000r/min | ||
6 | Operating mode | ? | Maixin servo |
7 | Operating Voltage | ? | AC380V/50Hz |
8 | Run command | ? | G??Code |
9 | operating system | ? | Taiwan Jingke System |
10 | net weight | ? | 4600Kg |
?
service
- 設備安裝和調試 *設備到達用戶后，一銘數控技術工程師當天到達用戶現場進行安裝、調試培訓
*Please prepare the work before the engineer arrives at the site. For example: unloading equipment, equipment site, power supply, computer, plug, voltage regulator, leakage protector, please actively cooperate with the user, and after the equipment debugging is completed, please ask the user to accept it
*The trainee must have certain relevant academic qualifications and knowledge, and the supplier will train the customer in programming, operation, processing and daily maintenance. The trainee must be fixed and study carefully.
*The supplier's technical engineer conducts periodic follow-up visits to customers, and conducts machine operations and product processing with them
Face to face technical communication, users can consult Yiming with any questions at any time through phone and email.
*Pre-sales free use training for customers.
*The trainee must have certain relevant academic qualifications and knowledge, and the supplier will train the customer in programming, operation, processing and daily maintenance. The trainee must be fixed and study carefully.
*Supplier technical engineers visit customers from time to time, and communicate with customers on machine operation and product processing. Users can consult Yiming any questions by telephone or email at any time.
- After-sales service
* During the warranty period, the machine will be repaired free of charge, and the equipment repairs within the warranty period will be clearly marked.
*The warranty period provides customers with two free maintenance.
*General maintenance work is carried out on-site, and the corresponding maintenance time does not exceed 36 hours
*設備整機免費保修壹年
qualification documents
Preparation before equipment placement
1Equipment environmental requirements
Confirm that the equipment is in place at the designated location, and generally recommend a concrete floor;
Confirm the preparation status of workshop power supply, gas source, sockets, etc
The recommended storage temperature for C is generally 0-45 ℃, with a relative humidity of 40% -80%
D No hazardous materials, such as flammable, explosive, highly corrosive gases, etc
2、 For trainees, operators are required to be familiar with simple computer operations, diligent and eager to learn. It is recommended to have two or more people learning at the same time
3、 Equipment installation training
After the A device arrives at the designated location, the user checks the appearance of the device for any damage or bumps. If there are any abnormalities during the transportation process, please contact us as soon as possible and wait for confirmation before receiving the goods. If you sign and receive the goods without authorization, you will be responsible.
After the B engineer arrives at the training site, the user conducts a basic acceptance and begins the training. The engineer will install and debug the machine within 3-5 days for the customer to use, ensuring that the installation is neat and orderly.
C 培訓內容包括：設備操作，軟件操作，日常維護保養，簡單故障排除等。
After the training is completed, the customer inspects and fills out the training form for the trainees based on the actual situation
并對技術工程師做出評價，以便我們做的更好
Let us keep in touch
Automatic edge banding machine
Functional characteristics
YM-828SL-PUR fully automatic edge banding machine, with a maximum speed of up to 30m/min. This model is fully functional, with a stable and powerful system, intelligent operation control, and high-speed and efficient production, suitable for mass production of aluminum honeycomb panels
用高品質材料及品牌配置，能夠適應于高低溫氣候及其他惡劣環境中進行生產運作，具備生產穩定、省維修、耐用性等特點。
Main functions: pre milling - six wheel pressing and pasting - gluing and pasting 1 (PUR glue pot+PUR automatic glue injection machine) - gluing and pasting 2- double guide rail alignment - rough trimming - fine trimming - four blade tracking - scraping edge 1- scraping edge 2- flat scraping - polishing 1- polishing
Scope of use
The fully automatic edge banding machine is suitable for edge banding processing of aluminum honeycomb board, medium density fiberboard, blockboard, solid wood board, particle board, polymer door board, plywood and other boards. It can have functions such as conveying, gluing, pressing, trimming, rough trimming, fine trimming, profiling tracking, scraping, polishing, etc. at once. Its edge banding effect is delicate, smooth, and has a good hand feel, and the sealing line is straight and smooth. This device is stable, reliable, durable, and reasonably priced, especially suitable for large and medium-sized furniture factories, as well as manufacturers of panel furniture such as cabinets and wardrobes. Its characteristics are automation, high efficiency, high precision, and aesthetics, and it has been widely used in domestic panel furniture production enterprises.
Equipment technical parameters
model | Model | YM-828SL-PUR |
Machine size ? | Overall Size(L X W X H ? | 10500*970*1800mm ? |
working pressure ? | Working Pressure ? | 0.6Mpa ? |
Total power ? | Total power ? | 25KW ? |
Feed rate ? | Feed speed ? | 22-26m/min ? |
Electric lift ? | Electric lifting ? | 0.37KW ? |
Sheet thickness ? | Panel Thickness ? | 10-60mm ? |
Sheet length ? | Sheet length ? | >120mm ? |
Sheet width ? | Panel Width ? | ~60mm ? |
Edge band thickness ? | Edge thickness ? | 0.4-3mm |
configuration list
Serial number | Configuration model ? | brand ? | Brand logo ? |
1 | 輸送電機 ? | Tengwan/Taibang ? |
|
2 | Rubber pot high-temperature bearing ? | Germany/SWC ? |
|
3 | Equal head/other cylinders ? | Yadeke/WSM ? |
|
4 | Tracking cylinder ? | AirTAC ? |
|
5 | proximity switch ? | Knox ? |
|
6 | PLC ? | DELTA ? |
|
7 | Frequency converter ? | Huichuan/Taiwan Delta ? |
|
8 | touch screen ? | DELTA ? |
|
9 | 接觸器 ? | Schneider, France ? |
|
10 | solenoid valve ? | Schneider, France ? |
|
11 | Rubber pot sealing ring ? | Taiwan/SOG ? |
|
12 | water separator ? | EASUN ? |
|
13 | 高速電機 ? | German UFC/Tianyi ? |
|
14 | 溫控表 ? | AUTONICS ? |
|
15 | 行程開關 ? | Kaikun, South Korea ? |  |
Equipment detail photos
Image display | function | Detailed description |
 | Touchscreen: | 15 inch industrial high-definition touch screen, with a large screen for easy clicking and larger buttons. |
 | Pre milling | Diamond pre milling cutter is used to mill away the ripple marks and excess burrs on the spiral edge trimmer of the wooden board, so as to The edge of the board is more closely attached to the edge banding, with a stronger and more aesthetically pleasing adhesion. The pre milling seat with pneumatic control is more precise and convenient to operate. |
 | PUR glue pot Six wheel adhesive tape wheel | No need to clean PUR glue pot, no glue stored, directly inject glue onto the glue coating shaft, no need to clean, eliminating the step of cleaning PUR, and improving production efficiency. Pur special adhesive is waterproof, moisture-proof, and high-temperature resistant, making it the first choice for high-end edge sealing such as balcony doors, bathroom cabinets, etc. After edge sealing, it is firmly bonded and never peels off. |
 | PUR automatic glue injection machine | Automatic constant temperature, automatic glue injection, and automatic control of glue. Environmentally friendly PUR adhesive, waterproof, moisture-proof, and high-temperature resistant, suitable for edge sealing of products in various special environments such as humidity and high temperature. |
 | EVA glue pot Six wheel adhesive tape wheel | The traditional bottom glue pot paired with a six wheel pressure stick double glue pot can take turns using different colors of glue, eliminating the need for frequent cleaning of the glue pot and improving efficiency. Six rounds of pressing and pasting make the edge banding tape adhere to the surface of the board, and the rubber wheel tape is elastic, resulting in better adhesion. |
 | Double guide rail end cutting | Double guide rails with head and tail aligned, faster and more stable speed, eliminating board collisions. |
 | Rough Fine trim | Adjustment method: The five-star handle with a digital meter adjusts the trimming thickness of the rough trimming knife, which is intuitive, simple, and easy to learn. The six blade alloy flat knife removes excess edges |
 | Fine trim | Six bladed R-blade trims excess edge banding to form rounded corners, resulting in more aesthetically pleasing trimming |
 | Four blade tracking edge trimming Coraping trim | Trim the four corners after edge banding into small curves for a smoother and less irritating effect. Four blade tracking refines the traditional two head tracking action into four actions, which are independently controlled by four motors, increasing the speed by 50% and making the actions more reasonable without damaging the board. |
 | Scraping * 2 groups Scraping * 2 | Two sets of pneumatic controlled scrapers do not require separate calibration, and the screen is in place with just one click. Scratch the fine lines on the edge banding with a superhard alloy R-knife to make it smooth. |
 | Broken wire | The anti-collision wire breakage mechanism pulls the edge sealing thread that has been scraped off, preventing the scraped thread from running to the polishing motor and conveying motor behind. |
 | Scratching | Scrape off the edge banding above the board surface and excess glue on the board with an alloy flat knife |
 | 2 sets of reciprocating polishing Buffing * 2 | 布輪快速對封邊條邊緣進行拋光打磨，選擇不同拋光輪對應深淺不同膠水，防止臟版。氣動往復式拋光，拋光電機氣動進出，拋光輪使用面積更大，拋光效果更好 |
 | Centralized Lubrication System | Automatic timing oil injection and maintenance, multi-channel oil pipes are connected to each key moving part, all-round lubrication, reduce machine wear and extend machine service life. |
 | 清洗裝置（前隔離后清 洗） | Spray isolation liquid on the board surface to prevent glue from overflowing. Cleaning residual glue on board components, more aesthetically pleasing, adjustable nozzle water volume, convenient to use |
 | Plate clamping device | Narrow panels will not shake or shift due to external forces during pressing and aligning, resulting in more stable operation |
 | Narrow board auxiliary guiding ruler | When sealing the edges and aligning the ends of narrow panels, fix the panels to prevent tilting. |
 | Conveyor (optional accessory) | Narrow panel feeders with high safety and efficiency |
 | Edge sealing effect | The edge banding effect is smooth and beautiful, with good wrapping and perfect chamfering. |
service
1. Equipment installation and debugging
(1) After the equipment arrived, the Yiming CNC technical engineer arrived at the user's site on the same day for installation and debugging training.
(2) Please prepare the work before the engineer arrives at the site. For example: unloading equipment, equipment site, power supply, computer, power strip, leakage protector, please actively cooperate with users. After equipment debugging, please request user acceptance.
2. Training
(1) Free pre-sales training for customers.
(2) The trainees must have a certain level of relevant education and knowledge. The supplier will provide training to customers in programming, operation, processing, and daily maintenance. The trainees must be fixed and study diligently.
(3) The supplier's technical engineers conduct periodic follow-up visits to customers and engage in technical exchanges on machine operation and product processing. Users can consult any questions at any time via phone or email.
3. After sales service
(1) Free maintenance of the machine during the warranty period, and equipment maintenance beyond the warranty period will be priced clearly.
(2) The warranty period provides customers with two free maintenance services.
(3) General maintenance work is carried out on-site, and the repair response time does not exceed 24 hours.
(4) The whole machine comes with a one-year warranty.
Let us keep in touch
YM multifunctional hole slot all-in-one machine
產品設計亮點
◆YM–多功能孔槽一體機,各項配備均采用行業領先部件。
◆采用風冷電主軸，驅動系統采用伺服電機，效率更高。
◆一銘定制系統，模塊化參數，傻瓜式操作，操作簡單易上手。
◆ CNC digital control, with breakpoint memory function, ensures continuous operation in the event of accidental (knife breakage) or the next day.
◆ Overall structural welding, tempering and aging treatment, firm and not deformed. X-Z main casting structure, strong cutting force, higher accuracy.
適用行業
鋁蜂窩板、高光門板、生態門、室內門、護墻板等家居行業門板系列。
Equipment technical parameters
NO. | performance index | performance index | ? | parameter |
1 | stroke | X stroke | ? | 3000mm |
Y stroke | ? | 300mm | ||
Z stroke | ? | 200mm | ||
2 | Dimensions | ? | ? | 3800*1600*2100mm |
3 | Precision | Precision | ? | ±0.05mm |
Repeatability | ? | ±0.05mm | ||
4 | structure | Countertop structure | ? | PVC structure |
structure | ? | Z 絲杠、 X/Y 齒條 | ||
5 | speed | Maximum empty travel speed | ? | 60000mm/min |
Working speed | ? | 15000mm/min | ||
6 | Spindle power | ? | 3.5KW | |
7 | Operating mode | ? | ? | servo |
8 | Operating Voltage | ? | ? | AC380V/50Hz |
9 | Run command | ? | ? | G-code |
10 | operating system | ? | ? | Yiming Customized System |
11 | net weight | ? | ? | 1500Kg |
service
- Equipment installation and commissioning
*After the equipment arrives at the user, the technical engineer of Yiming CNC arrives at the user site for installation and commissioning training on the same day
*Please prepare the work before the engineer arrives at the site. For example: unloading equipment, equipment site, power supply, computer, plug-in voltage regulator, leakage protector, please actively cooperate with users. After the equipment debugging is completed, please ask the user for acceptance.
?
- Training
*Free after-sales training for customers.
*The trainees must have a certain level of relevant education and knowledge, and the supplier will program, operate, process, and perform daily maintenance on the customer
Face to face training requires trainees to be fixed and study diligently.
*Supplier technical engineers visit customers from time to time, and communicate with customers about machine operation and product processing. Users can consult Yiming any questions by phone or email at any time.
?
- After-sales service
* During the warranty period, the machine will be repaired free of charge, and the equipment repairs within the warranty period will be clearly marked.
*General maintenance work is carried out on-site, and the corresponding repair time does not exceed 24 hours.
Let us keep in touch
YM Profile Engraving and Milling Machine (Type A)
Functional characteristics
NO. | performance index | performance index | parameter |
1 | stroke | X stroke | 3000mm |
? | ? | Y stroke | 120mm |
? | ? | Z stroke | 200mm |
2 | Dimensions | ? | 4800*1500*2000mm |
3 | Precision | Precision | 0.1mm |
? | ? | Repeatability | 0.1mm |
4 | structure | Countertop structure | High strength aluminum profiles |
? | ? | structure | Y/Z lead screw, X rack |
5 | speed | Maximum empty travel speed | 100000mm/min |
? | ? | Working speed | 30000mm/min |
6 | Spindle power | T1 | 6.0KW |
? | ? | T2 | 2.2KW |
7 | Operating mode | ? | servo |
8 | Operating Voltage | ? | AC380V/50Hz |
9 | Run command | ? | G-code |
10 | operating system | ? | Yiming System |
11 | net weight | ? | 1800Kg |
?
Simple operation and detailed display
1．Operating system: Yiming customized system (programming free, modular parameters)
2. Motor and driver: Imported AC servo (X-axis 1000w Y-axis 1500w Z-axis 1000w)
3. Spindle motor: 6.0kw * 1 unit 2.2kw * 1 unit
4. Frequency converter: 7.5kw/380v * 1 set 2.2kw/380v * 1 set
5. Guide rail: straight square rail imported from Taiwan, high dustproof and lubrication free slide rail
6．Transmission mode: X-axis rack, Y-axis, Z-axis ball screw imported from Taiwan
7．Bed structure: rectangular steel pipe welding, cast aluminum head structure
8. Dust prevention treatment: Organ paper shield to effectively avoid dust and debris; Protective guide rail and lead screw
9. Main electrical components: Schneider
10. Cable: special cable for supporting chain
11. Lubrication: Automatic oil injection pump is used to regularly supply oil to each lubrication point
Product video introduction
YM Profile Engraving and Milling Machine (Type A)
◆ YM Intelligent Profile Processing Center, equipped with industry-leading components.
◆ Adopt air-cooled electric spindle, and the drive system adopts imported high-power servo motor.
◆ Taiwan Yiming customized system, modular parameters, foolproof operation, simple and easy to use.
◆ CNC digital control, with breakpoint memory function, ensures continuous operation in the event of accidental (knife breakage) or the next day.
◆ Overall structural welding, tempering and aging treatment, firm and not deformed. X-Z main casting structure, strong cutting force, higher accuracy
Cut sample
◆ Minimal doors, ecological doors and other furniture industries, profile processing.
◆ Mechanical processing industry: processing of soft metals such as copper and aluminum.
◆ Profile products: audio, game cabinets, computer tables, sewing machine tables, musical instruments.
Let us keep in touch
YM Profile Engraving and Milling Machine (Type C)
Functional characteristics
NO. | performance index | performance index | parameter |
1 | stroke | X stroke | 3000mm |
? | ? | Y stroke | 200mm |
? | ? | Z stroke | 200mm |
2 | Dimensions | ? | 4000*1500*2000mm |
3 | Precision | Precision | 0.1mm |
? | ? | Repeatability | 0.1mm |
4 | structure | Countertop structure | High strength aluminum profiles |
? | ? | structure | Y/Z lead screw, X rack |
5 | speed | Maximum empty travel speed | 100000mm/min |
? | ? | Working speed | 30000mm/min |
6 | Spindle power | T1 | 6.0KW |
? | ? | T2 | 2.2KW |
7 | Operating mode | ? | servo |
8 | Operating Voltage | ? | AC380V/50Hz |
9 | Run command | ? | G-code |
10 | operating system | ? | Yiming System |
11 | net weight | ? | 1500Kg |
Simple operation and detailed display
1．Operating system: Yiming customized system (programming free, modular parameters)
2．Motor and driver: imported AC servo (X-axis 1000w Y-axis 1000w Z-axis 1000w)
3. Spindle motor: 6.0kw * 1 unit 2.2kw * 1 unit
4. Frequency converter: 7.5kw/380v * 1 set 2.2kw/380v * 1 set
5. Guide rail: straight square rail imported from Taiwan, high dustproof and lubrication free slide rail
6．Transmission mode: X-axis rack, Y-axis, Z-axis ball screw imported from Taiwan
7．Bed structure: rectangular steel pipe welding, cast aluminum head structure
8. Dust prevention treatment: Organ paper shield to effectively avoid dust and debris; Protective guide rail and lead screw
9. Main electrical components: Schneider
10. Cable: special cable for supporting chain
11. Lubrication: Automatic oil injection pump is used to regularly supply oil to each lubrication point
Product video introduction
YM Profile Engraving and Milling Machine (Type C)
◆ YM Intelligent Profile Processing Center, equipped with industry-leading components.
◆ Adopt air-cooled electric spindle, and the drive system adopts imported high-power servo motor.
◆ Taiwan Yiming customized system, modular parameters, foolproof operation, simple and easy to use.
◆ CNC digital control, with breakpoint memory function, ensures continuous operation in the event of accidental (knife breakage) or the next day.
◆ Overall structural welding, tempering and aging treatment, firm and not deformed. X-Z main casting structure, strong cutting force, higher accuracy.
Cut sample
◆ Minimal doors, ecological doors and other furniture industries, profile processing.
◆ Mechanical processing industry: processing of soft metals such as copper and aluminum.
◆ Profile products: audio, game cabinets, computer tables, sewing machine tables, musical instruments.
Let us keep in touch
YM CNC Double Head Bevel Saw
Functional characteristics
NO. | performance index | performance index | parameter |
1 | stroke | Maximum machining stroke | 3000mm |
? | ? | Minimum machining stroke | 210mm |
2 | Dimensions | ? | 4500*1400*1100mm |
3 | Precision | Precision | 0.1mm |
? | ? | Repeatability | 0.1mm |
4 | Saw blade revolutions | Maximum empty travel speed | 12000 rpm |
? | ? | Working speed | 5000 rpm |
5 | Spindle power | Single side motor power | 1.1KW |
? | ? | Total power | 2.2KW |
6 | Cutting method | ? | Front and rear horizontal cutting |
7 | Operating mode | ? | servo |
8 | Operating Voltage | ? | AC380V/50Hz |
9 | working pressure | ? | 0.6-0.8Mpa |
10 | Run command | ? | G-code |
11 | operating system | ? | PLC |
12 | net weight | ? | 1200Kg |
?
Simple operation and detailed display
1．Operating system: PLC
2. Motor and driver: hybrid servo
3．Spindle motor: asynchronous motor 1.1 * 2 sets
4. Guide rail: straight square rail imported from Taiwan, high dustproof and lubrication free slide rail
5．Transmission mode: up and down/front and rear cylinder transmission, left and right positioning servo transmission
6. Saw blade diameter: 305mm (optional with 355mm)
7．Bed structure: rectangular steel pipe welding
8. Main electrical components: Schneider
9. Cable: special cable for supporting chain
10. Lubrication: Automatic oil filling pump is used to regularly supply oil to each lubrication point
Product video introduction
YM CNC Double Head Bevel Saw
◆ YM CNC double head bevel saw has developed this sawing machine in response to the current situation of diverse forms and unstable performance of sawing machines on the market.
◆ The bed body is welded with thick wall steel pipes, and the chassis is stable to ensure the stability of cutting when the saw blade rotates with great inertia.
◆ The shortest cutting material is 130mm
Cut sample
◆ Minimal doors, ecological doors and other furniture industries, profile processing.
◆ Mechanical processing industry: processing of soft metals such as copper and aluminum.
◆ Profile products: audio, game cabinets, computer tables, sewing machine tables, musical instruments.